ShapeShapeauthorShapechevroncrossShapeShapeShapeGrouphamburgerhomeGroupmagnifyShapeShapeShaperssShape

Tracking contaminated eggs

Settable eggs can be compromised, leading to challenges that extend beyond the loss of a single egg.

19 September 2019, at 6:54pm

The goal of a poultry breeding operation is to generate settable eggs that will result in viable chicks. Unfortunately, settable eggs can be compromised, thus leading to challenges that extend beyond the loss of a single egg.

When troubleshooting in the hatchery, an accurate account of where loss is occurring is necessary so that action can be taken to reduce loss from future hatches. For example, above-average hatching egg contamination (> 0.5 percent) is often traceable to the farm of origin. On-farm management decisions that may lead to hatching egg contamination include the use of floor eggs, poor detection of hairline cracks, dirty nests, belts and collection tables. Improper cooling and warming of eggs during on-farm storage and transport to the hatchery may lead to condensation of moisture on the egg surface, allowing the movement of contaminate organisms through the shell pores. In general, older flocks generate more contaminated eggs than young flocks. Using this information, corrective actions then can target the issue and reduce contamination.

a man with short brown hair in a blue shirt smiling
Scott Jordan works as a hatchery specialist in the World Technical Support division at Cobb-Vantress

© Cobb-Vantress

Rots, exploders, bangers or bombs are all terms used to describe contaminated eggs that explode during the incubation process. There are a variety of microorganisms that can contaminate the egg, but generally exploding eggs are the result of Pseudomonas spp., a gas-producing bacterium. These eggs start appearing around day 18 of incubation when contents may ooze out of the shell pores. When an egg explodes, it releases its contents and bacteria into the air as an aerosol that is distributed across the incubator. This has an impact on the hatching chicks since hatches with a high percentage of contaminated eggs have been associated with increased seven-day chick mortality. Accurately tracking the percentage of contaminated eggs for each individual flock can help the breeder/production department identify on-farm issues.

a hand covered with a rubber glove removes a rotton egg from an egg tray
Inspection and removal of contaminated eggs

© Cobb-Vantress

Most hatcheries track contamination by performing a hatchery residue breakout on predetermined trays of eggs after the hatch is complete. Unfortunately, a portion of the contaminated eggs are missed because they are removed at the beginning of the transfer process. In the current transfer system, the team member loading the eggs into the transfer machine will remove the visibly contaminated eggs before placing the eggs into the machine. The transfer machine is programmed to remove all clear eggs (infertile and early dead embryos). Trays predetermined for residue analysis have the “No Pick” option selected so that the clear eggs remain with the tray and analysed for fertility. The current method accounts for all eggs except the contaminated eggs, which were removed prior to transfer. Therefore, the number of contaminated eggs in the breakout data is inaccurate and underestimated.

eggs in a tray with a paper note that says
Sample index card indicating the number of contaminated eggs removed from tray at transfer

© Cobb-Vantress

In order to ensure all contaminated eggs are counted, consider the following. You will need an index card and a permanent marker during the transfer process.

  1. For those trays marked for residue analysis, the team member loading the transfer machine counts and removes the contaminated eggs.
  2. The team member loading the transfer machine communicates the number of eggs removed to the team member at the exit of the transfer table (where hatcher baskets are removed).
  3. The team member removing the basket writes the number of contaminated eggs on an index card and places the card inside the hatcher basket with the remaining fertile eggs. The card in the image above indicates that this is the top tray of rack 13 and the eggs are from flock 20512. There was a total of eight rots removed from this tray at transfer.
  4. The team member performing the breakout analysis adds the number on the card inside the hatcher tray to the number of contaminated eggs found during the breakout session, and the total is entered on the breakout sheet.
  5. The hatchery residue breakout data sheet containing the accurate number of contaminated eggs is then shared with the breeder team.

The current method of evaluating hatching egg contamination fails to account for all the contamination eggs found during incubation. The method described is a simple solution to the problem. Providing accurate information to the breeder team in a timely manner allows for a more immediate diagnosis and troubleshooting. When egg contamination exceeds expectations, go back to the breeder farm and review the process of egg handling. Rapid response and corrective action are critical to reducing contamination issues and thus an increased hatch of fertile eggs, promoting chick survival.